-
• Extends USB 3.0 up to 100m over CAT6a cable
• Supports data transfer rates up to 5Gbps
• Backwards compatible with USB 2.0 and 1.1
• Hardware acceleration for isochronous and bulk transfers
• USB-A ports 1 and 2 on the receiver support 5V/1.5A
• USB-A ports 3 and 4 support 5V/1A
• Supports RS-232 and FSYNC GPIO pass-through (industrial camera use)
• Bi-directional 24V PoC supported
• Plug and play, no drivers or settings required -
• Supports up to 4K@60Hz 4:4:4 resolutions (HDMI 2.0b)
• Seamless switching between input channels with multiple image combinations on a single UHD monitor
• Offers 8 display modes: Single, PIP, PBP (1), PBP (2), Triple (1), Triple (2), Quad (1), Quad (2)
• Control 4 computers with one keyboard, mouse, and monitor
• Built-in 3-port USB 3.1 Gen 1 hub with 5Gbps data transfer for sharing USB peripherals
• Supports multimedia, wireless keyboards, and mouse
• Audio de-embedding via analog and optical audio ports
• Volume control and independent audio selection
• OSD navigation for advanced settings
• EDID management
• Control via front panel, IR remote, keyboard/mouse hotkeys, OSD, controller software, and RS-232 -
• 60W USBC Charging on TX
• Uncompressed 4K2K@60Hz YUV 4:4:4
• Auto Switching
• HDMI / USB-C ALT-DP mode AV with USB2 -
• 1 x RS232/485
• TCP/UDP
• 1 x IR
• Support Pronto/CCF Code Transmission
• 1 x IO
• POE or 12-24V Supply -
• 2 x 75 Watt or 1 x 150 Watt amplifier for commercial, education or industrial applications
• 8/4 Ohm or 100/70v Line
• DSP with multiple control Options.
• Direct drive, constant power technology for superior audio performance and reliability
• Dante audio connectivity. -
• 1080P 60FPS
• Sony 1/2.8″ CMOS Sensor
• USB3.0, HDMI, SDI
• NDI|HX
• 20x Optical Zoom
• Tally Light -
• 5 x 2 presentation switcher with PIP/PAP/Tri/Quad-view
• True seamless switching, no freezing or black
• HDMI 2.0b, HDCP 2. 2, DP1.4 up to 4K60@4:4:4
• 3 × HDMI, 1 × DisplayPort and 1 × USB-C inputs
• 1 × HDMI, 1 × Mirrored HDBaseT 70M/POC outputs
• Full screen/PIP/PAP/Tri/Quad-view 5 configurable display modes
• Up to 14 output resolutions selectable
• 3.5mm analog audio de-embedding
• EDID management
• Buttons and RS-232 control -
This Dante USB adapter is for connecting a computer to a Dante audio network 2-channel recording/reproduction Sampling rate: 48 kHz Compatible with Windows, Mac OS, IOS and Android devices, no drivers required.
-
This Dante analog audio decoder lets you use all your legacy audio gear with any Dante-connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost-effective, compact featuring phoenix connector outputs for easy installation.
-
This Dante analog audio encoder lets you use all your legacy audio gear with any Dante-connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost-effective, compact featuring phoenix connector inputs for easy installation.
-
This is a 10 button wall plate controller featuring LAN, 2 x RS232, 2 x Relay, 1 x IR, 1 x IO. It can be powered via POE or 24v Plug Pack.
-
• Extends USB 3.0 up to 100m over CAT6a cable
• Supports data transfer rates up to 5Gbps
• Backwards compatible with USB 2.0 and 1.1
• Hardware acceleration for isochronous and bulk transfers
• USB-A ports 1 and 2 on the receiver support 5V/1.5A
• USB-A ports 3 and 4 support 5V/1A
• Supports RS-232 and FSYNC GPIO pass-through (industrial camera use)
• Bi-directional 24V PoC supported
• Plug and play, no drivers or settings required -
• Supports up to 4K@60Hz 4:4:4 resolutions (HDMI 2.0b)
• Seamless switching between input channels with multiple image combinations on a single UHD monitor
• Offers 8 display modes: Single, PIP, PBP (1), PBP (2), Triple (1), Triple (2), Quad (1), Quad (2)
• Control 4 computers with one keyboard, mouse, and monitor
• Built-in 3-port USB 3.1 Gen 1 hub with 5Gbps data transfer for sharing USB peripherals
• Supports multimedia, wireless keyboards, and mouse
• Audio de-embedding via analog and optical audio ports
• Volume control and independent audio selection
• OSD navigation for advanced settings
• EDID management
• Control via front panel, IR remote, keyboard/mouse hotkeys, OSD, controller software, and RS-232 -
• 60W USBC Charging on TX
• Uncompressed 4K2K@60Hz YUV 4:4:4
• Auto Switching
• HDMI / USB-C ALT-DP mode AV with USB2 -
• 1 x RS232/485
• TCP/UDP
• 1 x IR
• Support Pronto/CCF Code Transmission
• 1 x IO
• POE or 12-24V Supply -
• 2 x 75 Watt or 1 x 150 Watt amplifier for commercial, education or industrial applications
• 8/4 Ohm or 100/70v Line
• DSP with multiple control Options.
• Direct drive, constant power technology for superior audio performance and reliability
• Dante audio connectivity. -
• 1080P 60FPS
• Sony 1/2.8″ CMOS Sensor
• USB3.0, HDMI, SDI
• NDI|HX
• 20x Optical Zoom
• Tally Light -
• 5 x 2 presentation switcher with PIP/PAP/Tri/Quad-view
• True seamless switching, no freezing or black
• HDMI 2.0b, HDCP 2. 2, DP1.4 up to 4K60@4:4:4
• 3 × HDMI, 1 × DisplayPort and 1 × USB-C inputs
• 1 × HDMI, 1 × Mirrored HDBaseT 70M/POC outputs
• Full screen/PIP/PAP/Tri/Quad-view 5 configurable display modes
• Up to 14 output resolutions selectable
• 3.5mm analog audio de-embedding
• EDID management
• Buttons and RS-232 control -
This Dante USB adapter is for connecting a computer to a Dante audio network 2-channel recording/reproduction Sampling rate: 48 kHz Compatible with Windows, Mac OS, IOS and Android devices, no drivers required.
-
This Dante analog audio decoder lets you use all your legacy audio gear with any Dante-connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost-effective, compact featuring phoenix connector outputs for easy installation.
-
This Dante analog audio encoder lets you use all your legacy audio gear with any Dante-connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost-effective, compact featuring phoenix connector inputs for easy installation.
-
This is a 10 button wall plate controller featuring LAN, 2 x RS232, 2 x Relay, 1 x IR, 1 x IO. It can be powered via POE or 24v Plug Pack.